Skip to content

Cirrus Vision Jet Charter

Baltimore to Knoxville in 1 h 37 m

One leg, 1 h 37 m, no connection to misconnect on.

From
MTN · Baltimore
To
TYS · Alcoa
Block time
1 h 37 m
On the ground
6 h 01 m
Nights away
None

Your day

MTNTYSMTN

  1. LeaveBaltimore
  2. At the aircraftMartin State Airport
  3. Wheels upMTN
  4. On the rampMcGhee Tyson Airport
  5. On siteKnoxville
  6. 6 h 01 m on the ground
    Leave siteKnoxville
  7. Wheels upTYS
  8. On the rampMartin State Airport
  9. HomeBaltimore

On the ground

6 h 01 m

Door to door

11 h 15 m

Nights away

None

Illustrative, built from the block time above and a half-hour on the ground at each end. Shift the whole thing earlier or later and it still closes — the working window is set by flight time, not by the clock.

Grant cycles, review panels, and sponsor visits arrive on fixed dates set by institutions that will not reschedule around a cancelled regional flight. On Baltimore to Knoxville it works out to 418 nm each way, or about 9 h 09 m on the road.

Leave at 07 15, on site by 09 52, and the aircraft waits while you work. 6 h 01 m on the ground is a full session, and you are home by 18 30. The hotel night, the second working day, and the evening away all come off the cost of the trip — which is usually where the real money was.

Nobody is driving 9 h 09 m each way for a meeting, so the real comparison is the airline routing — and between Baltimore and Knoxville that typically means a connection, a total block time well over half a day, and an arrival window you do not control. A single segment removes the misconnect risk rather than managing it.

Neither end of this leg constrains the aircraft. That means short-notice departures are realistic and a schedule change on the day is usually absorbable rather than a rebooking exercise.

One type, learned properly. We place this leg with a Part 135 operator we already know on the Vision Jet, in an aircraft carrying CAPS — a parachute over the entire airframe — and a one-button emergency autoland any passenger can use. For a company putting four people on one aircraft, those are the specifications that matter.

Flight profileMTNTYS · 418 nm · 1 h 37 m
FL280 · 305 KTASMTNTYS

Distance

418 nm

Block time

1 h 37 m

By road

9 h 09 m

Cruise

FL280

Why this route works

  • 6 h 01 m on the ground, home by 18 30

    Wheels up 07 45, on site 09 52, back on the ramp at MTN by 18 00. 3 h 14 m of flying in total, and nobody's second working day spent in transit.

  • No hub, no connection

    The scheduled routing between Baltimore and Knoxville generally requires a connection. One segment removes the misconnect risk rather than managing it.

  • Lab work happens in the lab

    Sponsor visits, review panels, and collaboration sessions arrive on institutional dates that will not move for a cancelled regional flight.

  • Ten minutes from car to aircraft

    Private terminals at both ends. No screening queue, no gate, no boarding group — you park, walk out, and go.

  • Parachute and autoland, standard

    The Vision Jet carries CAPS, a whole-airframe parachute, and Safe Return, a one-button emergency autoland. No other jet in production offers either, at any price.

The Fields

Both ends of this leg

Private terminals at each end. No screening queue, no gate, and a walk from the car to the aircraft measured in yards.

Departure

Martin State Airport

MTN · KMTN · Baltimore, MD

Johns Hopkins, the federal research agencies, and the defense base at Aberdeen.

Longest runway
6,996 ft
Field elevation
21 ft
MTN charter details →

Arrival

McGhee Tyson Airport

TYS · KTYS · Alcoa, TN

Oak Ridge National Laboratory, TVA, and the advanced-materials work around them.

Longest runway
9,009 ft
Field elevation
981 ft
TYS charter details →

Questions

Chartering MTN to TYS

How long is the flight from Baltimore to Knoxville by private jet?

About 1 h 37 m of block time in a Cirrus Vision Jet, covering 418 nautical miles from Martin State Airport (KMTN) to McGhee Tyson Airport (KTYS). That includes taxi, climb, and descent; actual time varies with winds and routing.

Can I fly MTN to TYS and back in the same day?

That is what the pair is for. Wheels up 07 45, on site in Knoxville by 09 52, 6 h 01 m on the ground, and home by 18 30 — 11 h 15 m door to door with no overnight.

How many colleagues can travel to Knoxville?

Four seats, every flight, with 32 cubic feet for bags, samples, and materials. The airframe is certified for more, but four is the load that works with fuel and luggage on a leg like this, so it is the number we quote against.

Can the Vision Jet use McGhee Tyson Airport?

Yes, with margin. McGhee Tyson Airport has 9,009 feet of runway, well inside the Vision Jet's requirements in any normal condition.

What does a MTN to TYS charter cost?

Pricing depends on date, direction, passenger count, and whether the aircraft is already positioned near Baltimore. Halcyon quotes one all-in figure — aircraft, crew, fees, taxes and the ramp at both ends — inside the hour. That is the figure that reaches accounts payable.

How much notice do you need for a Knoxville trip?

Most legs can be arranged inside 24 hours when an aircraft is available, which is the point of the product for urgent site visits and escalations. You get a straight yes or no immediately rather than a request left open.