Cirrus Vision Jet Charter
Cincinnati to Richmond — Out and Back in a Day
348 nm nonstop in 1 h 23 m. The scheduled alternative is a hub, a connection, and an arrival time somebody else chose.
- From
- LUK · Cincinnati
- To
- RIC · Richmond
- Block time
- 1 h 23 m
- On the ground
- 6 h 29 m
- Nights away
- None
Your day
LUK → RIC → LUK
- LeaveCincinnati
- At the aircraftCincinnati Municipal Airport (Lunken Field)
- Wheels upLUK
- On the rampRichmond International Airport
- On siteRichmond
- 6 h 29 m on the groundLeave siteRichmond
- Wheels upRIC
- On the rampCincinnati Municipal Airport (Lunken Field)
- HomeCincinnati
On the ground
6 h 29 m
Door to door
11 h 15 m
Nights away
None
Illustrative, built from the block time above and a half-hour on the ground at each end. Shift the whole thing earlier or later and it still closes — the working window is set by flight time, not by the clock.
There is a category of meeting where showing up is the entire point: the pitch, the committee, the signing. Being the party who could not make the date work is a bad position to negotiate from. Between Cincinnati and Richmond that problem has a specific size: 348 nautical miles, and 7 h 37 m of it if you drive.
Leave at 07 15, on site by 09 38, and the aircraft waits while you work. 6 h 29 m on the ground is a full session, and you are home by 18 30. The hotel night, the second working day, and the evening away all come off the cost of the trip — which is usually where the real money was.
Nobody is driving 7 h 37 m each way for a meeting, so the real comparison is the airline routing — and between Cincinnati and Richmond that typically means a connection, a total block time well over half a day, and an arrival window you do not control. A single segment removes the misconnect risk rather than managing it.
Cincinnati Municipal Airport (Lunken Field) and Richmond International Airport are both business-aviation fields with private terminals, so the ten-minutes-before-departure arrival holds at each end.
One type, learned properly. We place this leg with a Part 135 operator we already know on the Vision Jet, in an aircraft carrying CAPS — a parachute over the entire airframe — and a one-button emergency autoland any passenger can use. For a company putting four people on one aircraft, those are the specifications that matter.
Distance
348 nm
Block time
1 h 23 m
By road
7 h 37 m
Cruise
FL280
Why this route works
6 h 29 m on the ground, home by 18 30
Wheels up 07 45, on site 09 38, back on the ramp at LUK by 18 00. 2 h 47 m of flying in total, and nobody's second working day spent in transit.
No hub, no connection
The scheduled routing between Cincinnati and Richmond generally requires a connection. One segment removes the misconnect risk rather than managing it.
Counterparties set the date
Diligence sessions and closings happen when the other side is available. A departure time you control is what makes those dates workable rather than aspirational.
Ten minutes from car to aircraft
Private terminals at both ends. No screening queue, no gate, no boarding group — you park, walk out, and go.
Parachute and autoland, standard
The Vision Jet carries CAPS, a whole-airframe parachute, and Safe Return, a one-button emergency autoland. No other jet in production offers either, at any price.
The Fields
Both ends of this leg
Private terminals at each end. No screening queue, no gate, and a walk from the car to the aircraft measured in yards.
Departure
Cincinnati Municipal Airport (Lunken Field)
LUK · KLUK · Cincinnati, OH
Procter & Gamble, GE Aerospace, and a consumer-brand cluster five minutes from downtown.
- Longest runway
- 6,101 ft
- Field elevation
- 483 ft
Arrival
Richmond International Airport
RIC · KRIC · Richmond, VA
A Fortune 500 headquarters cluster and the Commonwealth's legal and banking centre.
- Longest runway
- 9,003 ft
- Field elevation
- 167 ft
Questions
Chartering LUK to RIC
How long is the flight from Cincinnati to Richmond by private jet?
About 1 h 23 m of block time in a Cirrus Vision Jet, covering 348 nautical miles from Cincinnati Municipal Airport (Lunken Field) (KLUK) to Richmond International Airport (KRIC). That includes taxi, climb, and descent; actual time varies with winds and routing.
Can I fly LUK to RIC and back in the same day?
That is what the pair is for. Wheels up 07 45, on site in Richmond by 09 38, 6 h 29 m on the ground, and home by 18 30 — 11 h 15 m door to door with no overnight.
How many colleagues can travel to Richmond?
Four seats, every flight, with 32 cubic feet for bags, samples, and materials. The airframe is certified for more, but four is the load that works with fuel and luggage on a leg like this, so it is the number we quote against.
Can the Vision Jet use Richmond International Airport?
Yes, with margin. Richmond International Airport has 9,003 feet of runway, well inside the Vision Jet's requirements in any normal condition.
What does a LUK to RIC charter cost?
Pricing depends on date, direction, passenger count, and whether the aircraft is already positioned near Cincinnati. Halcyon quotes one all-in figure — aircraft, crew, fees, taxes and the ramp at both ends — inside the hour. That is the figure that reaches accounts payable.
How much notice do you need for a Richmond trip?
Most legs can be arranged inside 24 hours when an aircraft is available, which is the point of the product for urgent site visits and escalations. You get a straight yes or no immediately rather than a request left open.
Nearby
Other legs on this network
More ways out of Cincinnati, and more ways into Richmond.