Cirrus Vision Jet Charter
Skip the Hub: Northwest Arkansas to Austin
One leg, 1 h 32 m, no connection to misconnect on.
- From
- XNA · Bentonville
- To
- EDC · Austin
- Block time
- 1 h 32 m
- On the ground
- 6 h 11 m
- Nights away
- None
Your day
XNA → EDC → XNA
- LeaveNorthwest Arkansas
- At the aircraftNorthwest Arkansas National Airport
- Wheels upXNA
- On the rampAustin Executive Airport
- On siteAustin
- 6 h 11 m on the groundLeave siteAustin
- Wheels upEDC
- On the rampNorthwest Arkansas National Airport
- HomeNorthwest Arkansas
On the ground
6 h 11 m
Door to door
11 h 15 m
Nights away
None
Illustrative, built from the block time above and a half-hour on the ground at each end. Shift the whole thing earlier or later and it still closes — the working window is set by flight time, not by the clock.
Semiconductor and hardware work is physical. You cannot debug a line, qualify a supplier, or walk a fab remotely, and the schedule for doing it is set by production rather than by convenience. For the Northwest Arkansas to Austin version, the gap is 390 nm — far enough to cost a day, close enough that losing one feels absurd.
Leave at 07 15, on site by 09 47, and the aircraft waits while you work. 6 h 11 m on the ground is a full session, and you are home by 18 30. The hotel night, the second working day, and the evening away all come off the cost of the trip — which is usually where the real money was.
Nobody is driving 8 h 32 m each way for a meeting, so the real comparison is the airline routing — and between Northwest Arkansas and Austin that typically means a connection, a total block time well over half a day, and an arrival window you do not control. A single segment removes the misconnect risk rather than managing it.
Both Northwest Arkansas National Airport and Austin Executive Airport are straightforward fields for this aircraft with margin in hand, which matters more than it sounds: routine pairs are the ones that dispatch reliably, and reliability is most of what a business traveller is actually buying.
We are a broker with one airframe on the sheet. That narrowness is the product: we know the operators, the fields and the real performance rather than guessing across forty types. Every flight is operated by an FAA Part 135 certificate holder.
Distance
390 nm
Block time
1 h 32 m
By road
8 h 32 m
Cruise
FL280
Why this route works
6 h 11 m on the ground, home by 18 30
Wheels up 07 45, on site 09 47, back on the ramp at XNA by 18 00. 3 h 03 m of flying in total, and nobody's second working day spent in transit.
No hub, no connection
The scheduled routing between Northwest Arkansas and Austin generally requires a connection. One segment removes the misconnect risk rather than managing it.
Customer sites and fabs
Escalations, integration work, and qualification visits happen where the hardware is. Same-day access turns a two-day trip into an afternoon.
Ten minutes from car to aircraft
Private terminals at both ends. No screening queue, no gate, no boarding group — you park, walk out, and go.
Parachute and autoland, standard
The Vision Jet carries CAPS, a whole-airframe parachute, and Safe Return, a one-button emergency autoland. No other jet in production offers either, at any price.
The Fields
Both ends of this leg
Private terminals at each end. No screening queue, no gate, and a walk from the car to the aircraft measured in yards.
Departure
Northwest Arkansas National Airport
XNA · KXNA · Bentonville, AR
Walmart, Tyson, and J.B. Hunt — and the thousands of supplier offices serving them.
- Longest runway
- 8,800 ft
- Field elevation
- 1,287 ft
Arrival
Austin Executive Airport
EDC · KEDC · Austin, TX
Semiconductor fabs, the venture community, and the state capitol.
- Longest runway
- 6,025 ft
- Field elevation
- 620 ft
Questions
Chartering XNA to EDC
How long is the flight from Northwest Arkansas to Austin by private jet?
About 1 h 32 m of block time in a Cirrus Vision Jet, covering 390 nautical miles from Northwest Arkansas National Airport (KXNA) to Austin Executive Airport (KEDC). That includes taxi, climb, and descent; actual time varies with winds and routing.
Can I fly XNA to EDC and back in the same day?
That is what the pair is for. Wheels up 07 45, on site in Austin by 09 47, 6 h 11 m on the ground, and home by 18 30 — 11 h 15 m door to door with no overnight.
How many colleagues can travel to Austin?
Four seats, every flight, with 32 cubic feet for bags, samples, and materials. The airframe is certified for more, but four is the load that works with fuel and luggage on a leg like this, so it is the number we quote against.
Can the Vision Jet use Austin Executive Airport?
Yes, with margin. Austin Executive Airport has 6,025 feet of runway, well inside the Vision Jet's requirements in any normal condition.
What does a XNA to EDC charter cost?
Pricing depends on date, direction, passenger count, and whether the aircraft is already positioned near Northwest Arkansas. Halcyon quotes one all-in figure — aircraft, crew, fees, taxes and the ramp at both ends — inside the hour. That is the figure that reaches accounts payable.
How much notice do you need for a Austin trip?
Most legs can be arranged inside 24 hours when an aircraft is available, which is the point of the product for urgent site visits and escalations. You get a straight yes or no immediately rather than a request left open.
Nearby
Other legs on this network
More ways out of Northwest Arkansas, and more ways into Austin.